Hsca High Range Soundless Crack Agent Expansive Mortar Sca-I and Sca-II

What is actually CRACK AGENT / Expansive Mortar?

CRACK AGENT (Expansive Mortar) is a kind of powEPTwith incredible 18,000 PSI expansive strength when mixed with typical drinking water. Poured into holes, CRACK AGENT breaks reinforced concrete amp rock securely and quietly, even though providing SILENT cracking. Given that CRACK AGENT supplies controlled demolition in accordance to drilling patterns, it is really effortless to crack reinforcedconcrete and all types of stone into wanted measurements and designs, without noise, vibration or dust.

In demolition, concrete chopping amp excavating sector, CRACK AGENT assists you to split strengthened concrete and rock into chunks, so you could effortlessly lower off rebar, haul it away with a crane or truck with out damage remaining component.

In mining and quarrying business, CRACK AGENT aids to achieve perfect slabs and blocks from limestone, onyx, marble, granite or any other kind of stone you are operating with. Compares to blasting, CRACK AGENT avoids waste of useful stone, substantial insurance, high priced storage and labor. CRACK AGENT can also be utilized aEPT with standard strategies like primer cord, hydraulic breaker, diamond blade observed and jackhammer to support cut value, work time and enhance basic safety, Plus silent operation, CRACK AGENT is perfect for household, school and airport area. CRACK AGENT assists your operate to turn out to be more successful and cost efficient.

Dependent on different working temperature, there are four sorts of crack agent for your decision.

How to use


1. Drill holes employing an air hammer drill and suitable drill bit distinct to the rock kind.

2. Holes need to be drilled no additional than thirty-60cm (1ft-2ft) aside. Observe: In strengthened concrete suggested no more than 20cm (8 quot) apart.

three. Suggested gap diameter 38mm – 50mm (1 frac12 quot – 2. quot). Depth would be 70-ninety% of the way dependent on the kind of rock/content to be taken off.

MiXiHu (West Lake) Dis.ng

one. For normal safety reasons and miXiHu (West Lake) Dis.ng little quantities by hand, it is recommended to use rubber gloves.

two. In a bucket, mix 1.five Liters of water to one 5kgs bag of CRACK AGENT. Or pour drinking water and CRACK AGENT as a rate of 1:3 units by weight.

three. Mix nicely, making use of a drill and paddle is advised. If miXiHu (West Lake) Dis.ng with a adhere or other technique, make certain powEPTis completely dissolved into the h2o. Combine to a slurry.


one. Cleanse holes prior to filling making use of air hose take away extra dust from drilling.

2. CRACK AGENT slurry should be poured into holes inside ten-fifteen min. following miXiHu (West Lake) Dis.ng. Do not fill to the prime, only fill the holes about 15mm ( frac12 quot to one quot) from the leading.

3. Combine effectively and pour into holes while agitating the hole to make certain no air gaps are in the hole. Example: Making use of a piece of rod or adhere to poke holes.

four. For Horizontal holes, a grouting pump would be most reliable to bad.


The cracks show up in 40-60 min. soon after filling, depending on the climate,rocks, and concrete variety. The cracks grow to be wiEPTwithin time (maXiHu (West Lake) Dis.mun forty eight hrs expXiHu (West Lake) Dis.Hu (West Lake) Dis. time).



one. Incredible Expansive Ability

Wonderful eighteen,000 PSI expansive toughness when combined with typical water.

two. Easy to use

No official coaching needed before use. Just mix with drinking water and then fill into holes. Once mixed with thoroughly clean drinking water, CRACK AGENT can be poured into holes pre-drilled in the material you are operating with It can be poured into the exact same holes that dangerous explosives are normally positioned in.

3. Non-Explosive amp Environmentally Pleasant

An option to blasting, diamond blade saw, hydraulic breaker and jackhammer, which is safer, more productive, functions without sounds, vibration, dust by delivering silent expansive cracking.

4. Functions Proficiently and Price Efficiently

No Unique License, instruction or gear essential.


1. Initial stage: 5kg in plastic bag
2. Second action: four plastic luggage in one carton
three. 3rd action: fifty-sixty cartons on each and every wooden or plastic pallet.


  • Properly made hole drilling sample will decrease intake of CRACK AGENT by chopping into desired measurements.

  • To insure good results, CRACK AGENT needs Free of charge Place to grow to.

  • For much better results, it is EPTant to observe each air and content temperature. Content temperature is the temperature within of the rock or concrete which can be distinct from the air temperature.

  • In summer time, the greatest time to use CRACK AGENT is in the night when content temperature is cool.

  • In summer season, protect holes from direct sunligEPT to keep away from blow-out. Case in point: using a tarp or moist hay to give shade.

  • If CRACK AGENT fully dries into powEPTand did NOT crack, pour further drinking water onto CRACK AGENT filled holes.

  • When making use of CRACK AGENT on hugely absorbent components like concrete, the holes need to be dampened prior to the mortar is poured, producing certain nevertheless, that there is no presence of water.

  • Refreshing mortar need to be poured into holes in five minutes following miXiHu (West Lake) Dis.ng.

  • The personnel want to consider synchronized procedure, eEPTly to hard stone. The quantity of holes each and every worker accountable to fill has to be moderate. EPTking synchronized actions when miXiHu (West Lake) Dis.ng, stirring and filling will direct to maXiHu (West Lake) Dis.mum expansive stress with all holes grow at the same time.

  • When miXiHu (West Lake) Dis.ng, if CRACK AGENT commences to steam in container, include some drinking water to dilute and approach correctly.

EPT Safety measures

#8226Make confident that everybody doing work with CRACK AGENT understands the chance of blowouts, and has read the technical recommendations totally.

#8226CRACK AGENT is a hugely alkaline item, pH reaches 13 after get in touch with with h2o and can trigger significant irritation to mucous membranes, eEPTly eyes. Skin and eye contacts with CRACK AGENT must be rinsed off with massive amounts of chilly water right away with out rubbing. Consult a medical doctor rapidly.

#8226Wear basic safety goggles and rubber gloves throughout CRACK AGENT managing, miXiHu (West Lake) Dis.ng and filling. Dust-proof mask is recommended in inadequately ventilated places these kinds of as tunnels or mines.

#8226Plug the holes instantly soon after filling and protect the holes with straw mat. Maintain your experience away from the holes filled by mortar. Remain away from stuffed holes at the very least three hrs right after filling to avoid blow-out shot. Preserve individuals away from occupation internet site after filling .

#8226Warm or bubbling mortar is forbidden to fill into holes. Once filled holes commence to smoke or steam, that is the signal they may be about to blow out. Distinct the spot of folks right away.

#8226Keep men and women away from jobsite right after filling holes. In situation of individuals have to continue being in the area, include loaded holes with a tarpaulin.

#8226EPTke care of fall of cracked block from the cracking object.

Hsca High Range Soundless Crack Agent Expansive Mortar Sca-I and Sca-II

Hsca High Range Soundless Crack Agent Expansive Mortar Sca-I and Sca-II