Item Description
auto tire recycling EPT/ rubber EPTry with low-cost price tag
Operate of tire recycling EPT
* The tire recycling EPT employed to reducing the tires into rubber blocks, rubber granules and rubber powEPTseparately.
the equally radial and nylon tires could be lower by the tire slice EPT
Advantage of our tire recycling EPT:
one. More than 20 a long time of knowledge.
2. PatEPTd Items,1/3 vitality conserving!
3. CE amp ISO9001 certification.
Process flows:
Tyre recycling EPT is employed to make the squander tyre into rubber granules or rubber powder. It can treat both radial tyre and nylon tyre, get rid of the nylon or steel in the squander tire.
waste tires— tire circle chopping— tire strips reducing— tire slice cutting— tire crushing — magnetic separating— fiber separation-EPT-put in storage.
This production line incXiHu (West Lake) Dis.Hu (West Lake) Dis. the beneath:
Name of products | Amount(established) | Instruction | |
Pre-cutting gear | Tire circle cutter | 1 | To minimize doen the tire bead |
Tire strip cutter | one | To reduce the tires into rubber strips | |
Tire slice cutter | one | To lower the rubber strips into rubber blocks | |
Rims separator | one | To independent the steel wires from the tire bead minimize down |
Tyre Crusher: utilised to crush the rubber block into five-one hundred mesh rubber powder
Design No. | XKP-350 | XKP-four hundred | XKP-450 | XKP-560 | XKP-560D |
Diameter of front roll | 300mm(groove) | four hundred mm (groove) | 450 mm (groove) | 560 mm (groove) | 560 mm (groove) |
Diameter of back again roll | 300mm(groove) | 400 mm (groove) | 450 mm (groove) | 560 mm (groove) | 560 mm (groove) |
Drum working length | 500mm | 600mm | 760mm | 800mm | 1000mm |
Entrance roll liner pace | 26.2 | 34.five m/min | 38. m/min | forty.6m/min | 44m/min |
Roll ratio | 1:two.5 | one:two.5 | one:two.five | 1:two.five | 1:two.5 |
Max roller spacing | 8 mm | 8 mm | 8 mm | eight mm | eight mm |
Motor EPT | 37KW | 45KW | 55KW | 75KW | 132KW |
Fat | 6T | 8.five | 12 T | 13 T | 25T |
Information of our two grooved rollers:
one. Crusher roller pace ratio: Ours is 1: 2.5, while the old kind roller velocity ratio is 1: 1.38.
two. Roller structure: Our two rollers are both grooved, which improve the friction and then increase the output, even though the old sort is one particular with groove, and the other is smooth.
three. Roller materials: The roller is produced by Welding use resistant alloy resources, 5Cr6MnMo. We can offer you 3 a long time warranty of the roller. Even though the aged types EPT use forged iron to make the rollers, very simple to crack or crack in two .
Pertinent AuXiHu (West Lake) Dis.liary Gear:
Title of gear | Quantity(established) | Instruction | |
Relevant AuXiHu (West Lake) Dis.liary Equipment | Major vibrating monitor | one | Independent the rubber powEPTfor the initial time (5-10 mesh) |
Vice vibrating display | 1 | Independent the rubber powEPTfor the 2nd time (the closing measurement of rubber powEPTwe require) | |
Conveyor belt | 1 | To transfer the rubber powEPTthat could not meet the mesh requirested again to tire crusher and crush once more | |
Fiber separator | 1 | Individual the nylon from rubber powder | |
Magnetic separator | two | Different the steel wire from rubber powder | |
Remark | The earlier mentioned equipments represent the complete set of waste tyre recycling EPT, no require include any EPT far more. |
EPT instances :
Loading :